| FSR-H sektionen  | ByggsidanRitningar | Propellerguide

Hydrosidan

Senast uppdaterad 10 January 2006

 

den 30 januari 2000
Snabba Japaner.
Fick lite info om snabba Japanska båtar från Keishi Kubo, Snoopy Boat Team. De är inte sämre än Jänkarna! Titta här »

http://www.hi-ho.ne.jp/snoopy/Snoopy_Boat_Team.htm
snoopy@hi-ho.ne.jp

 den 11 januari 2000
Intressant tips från MWD diskussionsgrupp hur du fixar en bulig pipa!
Idag kom det ett intressant tips om hur man kan ta bort "bulor" på pipan så den blir som ny. Kan vara intressant eftersom pipor inte är billiga!

"I just removed my tuned pipe from the freezer!

Here is a tip that will help you.  If you have pipes that have dents in
them like I do, put a stopper in both ends and fill with water.  Put the
pipe in the freezer and the ice will remove the dents.  Cool huh....?
Marty Davis"

"This does work great, but you must fill the pipe according to the size of the dent.
If the dent is small, stand the pipe on end with the dent(s) closest to the bottom and only fill the pipe to just above the dent. For the very best results check the pipe every 10 -15 min.
If the Dent is huge or the pipe has been run over by a TRUCK, you can still fix it, but you will need to completely fill the pipe and repeat the process until the pipe retains it's original shape.
If you mess up and blow it up like a balloon. Try it out anyway . It may run better then Stock!

Go Fast, Andy Brown"


 Andy Brown åker fort...119mph Läs mer här »

 

 

Innehåll

Ritningar
Här finns det ritningar på 3st hydrobåtar.
Läs mer här »

Byggsidan
Här skall du titta om du vill veta hur du bygger en hydrobåt.
Titta här »

Propellerguiden
Är du på jakt efter en propeller till din båt kan du titta på sidan propellerguiden. Där finns en sammanställning av de vanligaste fabrikaten.
Titta här »

 

Databaser

Motordatabasen
Hjälp till att bygga upp motordatabasen.
Läs mer här »



 

© Copyright André Westerberg
Synpunkter och kommentarer:
andre.westerberg@home.se